Quick guide 1533-2007-Q
7 of 16
Version 1.0.1/2019
Medema Production A/S
Designations functions
P&G R-net
1
Press the button 1 to start the Mini Crosser. Wait until the battery indicator is stable (3-5 sec).
2
Battery indicator
Show a more precis indication after approximately one minute of driving. When all
the LED is lit, the batteries are fully loaded. When only a couple of yellow lights are
visual - charge as soon as possible. If only the red LED are showing, or if they are
blinking - charge right away.
3
Driving profile show what the maximum speed are set to. There are five LED. One
LED refer to lowest speed and five LED refer to maximum speed.
4
Warning blinkers - all blinkers are activated. Even if the vehicle is turned of, it will
not stop blinking. To turn of the warning blinkers, the vehicle must be turned on, and
press the button for warning blinkers button (4) again.
5
Mode LED - lights up when the associated function is active
6
Light - turn the front- and backlight on. Turn it off again by pressing the light button (6) again.
7
Mode button - (electric functions). Scrolls through the available electric functions.
Use joystick up/down to adjust.
8
Blinkers (right and left) start blinkers on the side the arrow shows.
9
Mode LED - lights up when the associated function is active
10
Joystick - controls the direction and speed of the vehicle.
11
Speed increase/decrease - increase or decrease the maximum speed.
12
Horn - powerful electric horn.
1
5
6
12
7
8
2
4
3
9
11
10
