Playing Voices
1.
In idle mode, holding down [SHIFT] button, and then press one of
the voice direct button to enter the voice mode. LCD will display the
current voice name and number and highlights “R1”.
2.
Use the data dial, [+/YES]/ [-/NO] button to select a voice you want
to play. You can also use the voice direct button to select one.
3.
You can play the keyboard and listen to the wonderful voice.
Note:
When the DUAL and LOWER function is on, you can hold down the
[SHIFT] button, and then press one of the voice direct buttons to shift
the status of voice sources, and the LCD cursor will highlight between
R1,R2,L1.
9
The instrument features 583 exceptionally realistic voices.
10 group of percussion voices. Please refer to Voices List.
Playing Voices
Playing two voices simultaneously-DUAL
1.
In idle mode, press [DUAL] button to turn dual function on.
The LCD displays current voice name and number, and highlights
“R2”.
2.
When “R2” is highlighted, use the data dial, the [+/YES], [-/NO]
button or voice direct button to select the dual voice you want to
play.
3.
Play the keyboard, and then you will hear two different voices are
sounded simultaneously in a layer. It seems like two different
instruments playing at the same time.
Note:
When the keyboard has been split, only the right hand area will
respond the dual voice, the left hand will not respond to it.
Playing different voices with both hands-LOWER
1.
In idle mode, press [LOWER] button to turn the lower function on.
The keyboard is split into two independent sections, and each
section has its voice. The LCD displays the left hand voice name
and number, and highlights “L1”.
2.
When “L1” is highlighted, use the data dial, the [+/YES], [-/NO]
button or voice direct button to select the lower voice you want to
play.
3.
Play the keyboard in different sections, and you will hear two
different voices.
Note:
The right hand voice does not change when you change lower voice.
Split Point
The Point on the keyboard that separates voice L and voice R1/R2 is
called the "split point". The split point is set to F#3/G3 at the factory
setting. However you can set this to any key you want. Refer to
KeySplit setting for split point setting.
0
5
25
75
95
100
aw_Sp5500S_Manual_G07_130124
2013
1
24
16:11:21