Medeli sp 5100, Owner'S Manual, Page: 9 / 28

Operation
Power on & Master Volume
9
The level decreases The level increases
VOICE STYLE SONG
+
Press together
VOLUME
MAX MIN
1.
Press the [POWER] switch. The LED display lightens up.
2. Slide the
[VOLUME]
bar rightwards, the whole volume
increase, slide it leftwards, the whole volume decreases.
3.
Press the [+] and the [-] button synchronously, and then
power on the piano. It can reset all the setting to the default
value and erase the record data.
Note:
If the LED display has not lightened up after you power on the
piano, please check the power supply.
If the piano is silent, the volume may be set to its minimum
level.
When the piano is not in use or during thunderstorm, please
disconnect the power for safety purpose.
Voices and Effects
There are 20 voices in total (See Appendix 1).
1.
Voice Select
When power is on, LED lightens the VOICE flag and displays
the 001 voice number.
2.
Press the [VOICE] button to enter the voice mode, LED
displays the VOICE R1 number.
3.
Press the [DUAL] button to enter the dual voice mode, LED
displays the VOICE R2 number.
4.
You can select other voice by pressing the [+] and the [-] or
voice Direct Select buttons.
Use Direct Select buttons to select
There are 10 voices Direct Select buttons to select 20 voices. Each
Direct Select button can be used to choose 2 different voices.
Press the first time to select upper layer voice, press the second time
to select the lower layer voice.
When you select the upper layer voice, the upper layer indicator turns
on.
When you select the lower layer voice, the lower layer indicator turns
on and the upper layer indicator turns off.
STYLE
SONG
VOICE
VOICE
VOICE
STYLE
STYLE
SONG
SONG
Display VOICE R1
Display VOICE R2
Select a voice
Press the first time to select GRD.PIANO
Press the second time to select BRT.PIANO
In order to save energy, we have designed the “Automatic
Shutdown” function to the piano. With this function, the piano
will shutdown automatically when you have left it idle for
more than 30 minutes. If you don’t need this feature, just
press and hold the [A0] key (the 1st key) and turn it on.
0
5
25
75
95
100
aw_SP5100erp_manual_G06_140210
2014 2 10 17:27:55