Waiting for recording:
Press the
[RECORD]
button for the second time to enter
the record mode. The LCD lightens the REC flag, four beats
flashes synchronously to indicate waiting for recording.
At the same time an empty track will be selected to be
recorded automatically and relative track flag flashes (the
selection order is Melody1,Melody2...Melody5 and Accomp,
the Melody1 will be selected while all tracks are't empty ).
Press the
[ACCOMP]
,
[MELODY 1]
...
[MELODY 5]
button
to select the track you want to record.
Parameters such as the voice, style and tempo can be revised.
Start recording:
When 4 beats on LCD flashes, press the
[START/STOP]
button or play the keyboard to start recording.
when entering record mode, the old data of the
selected track will be overwritten.
StGrPn1
Flash synchronously
1
2
3
There are 3 states of choosing tracks in the left cursor
of LCD: glimmer, lighten and darken.
When the cursor is flashing, it indicates the flashing
track is the track chosen to be recorded.
When the cursor is lightened, it indicates there is
recorded material in this track for the selected song.
When the cursor is darkened, it indicates there is no
data in this track or there is data on this track but it is
forbid to play the recorded material while recording.
Press "Accomp" (or "Melody 1" to "Melody 5") to select
the desired track. The corresponding track will be
switched between the above three states.
Only 1 Melody track can be recorded at a time,
whereas "Accomp" track can be recorded with a
Melody track at the same time.
Style can only be recorded in "Accomp".
Choosing tracks
Full
4
Stop recording:
Press the
[RECORD]
button for the third time to stop
recording.
If Accomp track is recording, press the
[INTRO/ENDING]
button to stop recording after the ending accompaniment
is over.
If the capacity is full while recording, the recording will be
stopped automatically with the FULL display on LCD.
Flash
StGrPn1
3 kinds of states:
Glimmer
bright
darken
29
DZBPFB0DQXDOB*BSGI
DZBPFB0DQXDOB*BSGI
