This section contains information about setting up your instrument and preparing to play. Please
go through this section carefully before turning the power on.
You can power the unit either by batteries
or by power
adaptor. Follow the instructions described
below.
Using Batteries
6 pieces of C size (SUM-2 or R-14) or
equivalent alkaline
batteries must first be
installed into the battery
compartment.
1.
Open the battery compartment cover
located on the
bottom
cabinet of the
unit.
2.
Insert the batteries
,
carefully follow
the polarity
markings on the cabinet.
3.
Close the compartment cover,
making sure that it locks
firmly in place.
Caution:
Do not mix old and new batteries.
Always use same types of batteries.
Always remove the batteries from the
unit when it is not
being used for an
extended period of time.
Using Power Adapter
1.
First, please make sure that POWER ON/OFF switch
of the instrument is set to OFF.
2.
Connect the AC adaptor to the power supply jack.
3.
Plug the AC adaptor into an AC
outlet
.
And
when
turning
the
power
OFF
,
simply
reverse
the
procedure
please
.
This
will
automatically
cut off the battery power
supply.
4.
Turn the power ON.
Note:
When the keyboard is not in use or in the time of
thunderstorm, please disconnect
the
power
for
safety
purpose
.
A prompt voice sounds every two minutes
if
there is no
operation
.
In order to save energy, we have designed the “Automatic
Shutdown” function to the
. With this function,
the keyboard will shutdown automatically when you have
left it idle for more than 30 minutes. If you don’t need this
feature, just press and hold the [C2] key (the 1st key) and
turn it on.
keyboard
Setup
Power Supply
6
0
5
25
75
95
100
aw_MC49Aerp_Manual_G08_121018
2012
10
18
16:07:19
