Function Menu
Reverb Volume
1.
Holding down [SHIFT] button, and then press [F/-] button
to select reverb volume menu. LCD displays “xxx ReverbVol”.
Use [+/YES]/ [-/NO] or data dial to change reverb volume.
Range: 0~127
2.
Press [+/YES] and [-/NO] simultaneously will set the reverb volume
to its default setting.
Note:
The reverb volume default value depends on the voice.
ReverbVol
26
Chorus Volume
1.
Holding down [SHIFT] button, and then press [F/-] button
to select chorus volume menu. LCD displays “xxx ChorusVol”.
Use [+/YES]/ [-/NO] or data dial to change chorus volume.
Range: 0~127
2.
Press [+/YES] and [-/NO] simultaneously will set the chorus volume
to its default setting.
Note:
The chorus volume default value depends on the voice.
Harmony Type
1.
Holding down [SHIFT] button, and then press [F/-] button
to select harmony type menu. LCD displays “xxx xxxx”.
Use [+/YES]/ [-/NO] or data dial to change harmony type.
The harmony types are as follows:
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
LCD Display
Duet
StandardTrio
Full Chord
Rock Duet
Country Duet
Country Trio
Block
4 Close 1
4 Close 2
4 Open
1+5
Octave
Strum
Echo
Tremolo
Trill
2.
Press [+/YES] and [-/NO] simultaneously will set harmony type to
default setting: Duet.
3.
When the harmony type is echo, tremolo or trill, the speed of
harmony effect note can be adjusted. Please refer to the harmony
speed setting.
4.
When the harmony type is strum, echo, tremolo or trill, the tempo
setting will also change the harmony note speed.
C h o r u s V o l
D u e t
0
5
25
75
95
100
AW_DP388_Manual_G15_150405
2015
4
4
16:52:41