[POWER] switch
Setup
D.
After the initial set-up, rotate the adjuster on the bottom of the pedal
box to until it makes contact with the floor.
Power Supply
1.
Make sure that the piano is turned off. Before you switch your piano
on or off, turn down the volume of piano and any connected audio
equipments first.
2.
Connect the AC adaptor to the DC power jack instrument.
3.
Connect the power cable to the AC outlet.
4.
Press the [POWER] switch, the LCD will display “Loading.” which
indicates the piano has powered on.
5.
If you are ready to turn off the piano, press the [POWER] switch
again.
Note:
1.
In the idle mode, the piano will automatically shutdown in 30 minutes
if you do not take any action on the piano.
2.
When the keyboard is not in use or during thunderstorm, please
disconnect the power for safety purpose.
8
Loading.
Adjuster
AC power adaptor
Pedal cable
Pedal jack
E.
Connect pedal cable (10) with the foot pedal to the bottom-panel
pedal jack and connect the AC power adaptor to the DC IN terminal.
0
5
25
75
95
100
AW_DP330_Manual_G06_150420
2015
4
20
10:28:34
Summary of Contents for DP 330
Page 1: ...Owner s Manual DIGITAL PIANO 0 5 25 75 95 100 AW_DP330_Manual_G06_150420 2015 4 20 10 28 30...
Page 45: ...45 0 5 25 75 95 100 AW_DP330_Manual_G06_150420 2015 4 20 10 28 40...
Page 47: ...0 5 25 75 95 100 AW_DP330_Manual_G06_150420 2015 4 20 10 28 40...
Page 48: ...DP330_G07 0 5 25 75 95 100 AW_DP330_Manual_G07_1510222_ 2015 10 22 11 45 14...
