Using the provided cables, connect each Trigger input jack on the rear panel of the module, and make sure each
pad is connected to its corresponding Trigger input jack.
Note:
1.
The voice of hi-hat pad hitting is controlled by hi-hat pedal. Similar to a real drum kit, the hi-hat pad functions
as an 'open hi-hat' when the pedal is stepped. When the pedal is released, it functions as a 'closed hi-hat' .
Caution!
To prevent electric shock and damage to the device, make sure the power is switched OFF
on the drum and all related device before making any connection.
Setup
6
Connect the Pads and the Pedals
2.
Choking (pinching) the cymbal's edge with the hand immediately after hitting the cymbal makes the
sound stop. Both Ride and Crash cymbals have cymbal choke. But hi-hat don't have the cymbal
choke. Choking the crash/ride edge with the hand immediately after hitting the crash/ride mutes the
crash/ride sound.
to 7 crash
to 8 hi-hat
Drum Module
to 2 snare
to 9 hi-hat
control
Hi-Hat control pedal
Kick Trigger
to 1 kick
to 5 tom 3
to 6 ride
to 3 tom 1
to 4 tom 2
MIDI out
9V
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015
5
11
8:22:53
