24
Troubleshooting
Prompt Messages
Specifications
Problem
No sound
No sound from Pads
No click sound
The Pad volume doesn’t match the Song playback volume.
Cannot connect to the computer
Maximum Polyphony
64
Drum kits
Kit: 25 (20 P 5 Users)
GM Drum Kit: 11 GM Drum Kits
Instruments
Instrument: 226
(Drum Voice, Percussion Voice, Effect Voice)
9 Hi-hat Companion
Sequencer
Preset Pattern: 60
User Song: 1
Tick: 192 ticks per beat
Record: Real-time Record
Data Capacity: About 5000 notes
Tempo
30~280
Display
Backlit LCD
Connectors
TRIGGER INPUT CONNECOR, PHONES, AUX IN, USB
Control Buttons
Power on/off, Master Volume, Click, Kit/ Voice, Save/ Enter,
AFI, DBT, Coach, Song/ Rec, Start/Stop, Utility, Tempo, +/-,
Page.
Power Supply
DC 9V, 500mA
Dimensions
125(W) X 187.5 (L) X 95 (H) mm
Module Weight
0.5 kg
* All specifications and appearances are subject to change
without notice.
Possible Cause and Solution
1. Rotate the [VOLUME] knob to be sure that the volume isn’t down.
2. To be sure that Local Mode should be set to “ON”
1. To be sure that the pad is connected correctly.
2. To be sure not set the volume of the pad to 0.
1. To be sure the metronome is turned on.
2. To be sure not set the volume of the click to 0.
1. Adjust the song playback volume to match the pad volume.
1. Make sure the USB has correctly connected.
2. Do the connect operation again (Keep the computer on, and then
turn the module on, connect the USB cable).
Message
REC FUL
FAC SEt
EMP
OK
WAT
Meaning
The record data memory is full.
The factory reset of module is complete.
The user song is empty.
The drum kit and utility settings are saved.
The data is loading from flash ROM now, please wait.
C
M
Y
CM
MY
CY
CMY
K
AW_DD620_manual_G04_150508.pdf 24 2015/5/13 16:09:49
