1
4
2
5
3
6
• Inspect valves for cracks or chips and
inspect membranes for holes, tears or
warping. If you notice any damage to
these parts, replace them immediately.
Note
2.1 assembly of pump kit
Wash hands before touching
breastpump, kit and breasts
and avoid touching the inside of
containers or lids.
Snap membranes onto valves
until membranes lie completely
flat on valve.
Place your breastpump on a
clean and dry surface. Ensure
that the surface is solid and
secure so your breastpump will
not tip over or fall.
Securely attach breastshield to
breastshield connector.
Push assembled yellow valves and
white membranes onto bottom of
breastshield connectors.
Screw bottles onto breastshield
connectors.
Continued
next page.
2. assembly
Questions?
Visit
www.medela.com
or call us at
1-800-435-8316.
17
16
Parts you will need for this step:
• Breastshield
• Tubing
• Breastshield
connector
• Battery pack
• White membrane
• 9 volt power
adaptor
• Yellow valve
• Breastpump
• Metro motor
• Breastmilk bottles
and lids
or
or
