background image

Pumping Should Be Comfortable

When it comes to finding the 
right fit in a breastshield every 
mother is different. Sizing 
may change throughout your 
breastfeeding experience as 
the breast and nipple tissue 
changes. 

To determine the 

correct size breastshield,  
you need to watch your 
breasts while pumping. 

While pumping— 

You should see the following if you have the correct size breastshield:
•   Pumping feels comfortable, not 

painful.

•   The nipple is centered and moves 

freely in the tunnel.

•   Minimal or no areolar tissue is pulled 

into the tunnel of the breastshield.

•   There is gentle rhythmic motion in 

the breast with each cycling of the 

pump.

•   The breast empties all over. After 

pumping gently press around your breast. If an area still  

feels full or a bit firmer, you may not have emptied the milk duct in 

that area of the breast.

After pumping— 

•   After a pumping session the nipple is not irritated and is not painful 

to the touch.

If you do not see the above, you may need to seek the 

advice of a lactation or healthcare professional to assist 

you in getting the proper fit.   

areola

tunnel

breastshield

27 mm

24 mm

Summary of Contents for 67355S

















Reviews:

Related manuals for 67355S