MedeaWiz® DV-81
Team Kingsley LLC
4 |
P a g e
DV-81 Quick-Start Guide
The MedeaWiz DV-81 ships with the “Repeater” firmware installed. The HDMI
output set to Auto Mode, and the PLAYBACK MODE set to MENU MODE. Most
users can simply connect their HDMI monitor and install their SD memory card,
with files named in the same way as the older model MedeaWiz players.
* For Multi-Zone RSS firmware see bottom of page.
Example 1: You have one file that you need to run in a loop when power is turned
on:
Name the file 000.xxx (where xxx is the proper file extension such as mpg,
wma, mp4 or etc.)
Example 2: You have a looping file and also want to use the DV-68K with push
buttons or other serial control device:
Name the looping file 000.xxx as above. Then name the other files in
sequence 001.xxx, 002.xxx, 003.xxx, etc.
Make sure you are using ZEROS and not the letter O in the file name, Do not put
the files in a folder. Only put media files on the SD card.
You can download HD test files at
http://www.highdefforum.com/high-
definition-movies-video-clips/6537-official-hd-video-clip-list.html
On-Screen Menu for Setup
Press the “Setup” button on the remote control to enter the on-screen menu. Use
the ARROW keys to navigate, the OK key to make a selection, and the left ARROW
OR the RETURN key to go back one level. From the main menu, press the RETURN
key, then the PLAY/PAUSE key to exit the menu and begin file play.
MENU Mode to use DV-68K, TK-69K push-buttons or other serial control
In Menu mode the player will loop file 000.xxx until it receives a serial command
to play a file. After the file ends the player will loop 000.xxx again.
