Page9
USB CONNECTION TO PC
You can transfer files to and from the X3D via USB2.0 or fast USB3.0 transfer. Use the included Blue
USB3.0 cable to connect the X3D to your PC. After you have connected the USB cable press the on/off
button on the X3D and the LED’s on the navigation buttons will turn “off’. The Computer will automatically
install the correct drivers and then you will be able to navigate the X3D like any normal external USB drive.
Note:
Some Computers may take up to a few minutes to install the correct USB drivers. If you cannot
connect to the X3D than try another USB Port on your computer. The PC will detect the X3D and it will
display a connection Dialogue Screen.
Windows Checkdisk
When you connect any USB Drive to a Windows PC it will prompt you to do a file system check ‘checkdisk’
and you should accept this as this as it will attempt to fix any file systems errors on the Hard Drive.
EXTERNAL USB DEVICE DRIVER NOT REQUIRED
IMPORTANT:
FOR USB3.0 - USE THE SUPPLIED BLUE USB3.0 CABLE.
FOR USB2.0 - USE THE SUPPLIED BLUE CABLE OR ANY USB2.0 BLACK CABLE.
USB Slave
AUDIO SETTINGS
Surround Sound
Select “Don’t Care” if you are using 2 CH stereo. If you are using SPDIF or Co-Axial Digital then
select “AC3/DTS 5.1". If you are using HDMI Audio to amplifier then select “True HD DTS-HD 7.1”
HDMI Auto
HDMI Auto is the suggested setting for HDMI Audio
. All audio will automatically passed through to the
amplifier - Dolby / DTS Bitstream - Dolby True HD / DTSMA - PCM / Multi-Channel LPCM.
It is suggested to always use HDMI Auto in preference to HDMI Passthrough or LPCM Multi CH
SPDIF Passthrough
Use this setting to connect to an amplifier via Toslink optical cable or Co-Axial Digital RCA cable. The sound
will be passed through as Bitstream or PCM and the amplifier. Dolby True HD and DTSMA HD Audio and
Multi-Channel LPCM will not work on either SPDIF option.
SPDIF Downmix (2 channel)
Use this setting to connect to a Amplifier via Toslink optical cable or Co-Axial Digital RCA cable. The sound will
be downmixed to 2 channel stereo.
FORCE DECODE AAC/MP3
Use this setting if you do not get AAC/MP3 Audio in HDMI ‘Auto’ or Passthrough.
Summary of Contents for MED800X
Page 1: ...User Manual Firmware V2...
