MedcoVet Luma, User Manual, Page: 5 / 13

2.3.1.Power On
●
Press the Power Button (No. 5); there will be a short “beep” and all the
LCD segments will appear for 1 second. Afterwards, only the
countdown clock will be displayed.
●
The Clock shows the remaining time for treatment. If some remaining
time was left before you turned off the ​Luma​ from previous use, the
remaining time will be displayed.
2.3.2. Clearing Remaining Time
To clear the remaining time on the ​Luma​:
●
Turn the device off
●
With the device off, press & hold the Power Button for more than 2
seconds.
●
The display should reset to 00:00 and enable setting of a new time
2.3.3. Setting the Default Time
Each ​Luma ​has a default time that is redisplayed after the clock reaches
00:00 and the device is ready for another treatment. To change the default
time on the ​Luma:
●
Press the reset button on the device (No. 10)
●
Turn on the device
●
Press the Timer Buttons (No. 6), (+) or (-) to set the default treatment
time
●
When the desired default time is displayed, press the Laser Activation
Button (No. 7) to store the default treatment time
5