background image

Technical Manual for the

Speaker – DB18

Please note that every care has been taken to ensure the accuracy of our
technical manual. We do not, however, accept responsibility for damage,
loss or expense resulting from any error or omission. We reserve the right
to make alterations in line with technical advances and industry standards.

© MEDC 2002

04/02

Summary of Contents for DB18

Page 1: ...een taken to ensure the accuracy of our technical manual We do not however accept responsibility for damage loss or expense resulting from any error or omission We reserve the right to make alterations in line with technical advances and industry standards MEDC 2002 04 02 ...

Page 2: ...oles in the U shaped stirrup mounting bracket If required the unit can be initially placed via the Ø13mm Ø0 51 central hole in the stirrup The unit can be rotated to the required position and fixed via the two other holes MEDC recommend the use of stainless steel screws Cable Termination CAUTION Before removing the cover assembly ensure that the power to the unit is isolated Unscrew and remove the...

Page 3: ...ng on the internal components Replace the 2 off screws into the holes in the cover assembly and tighten evenly 3 OPERATION The operating voltage of the unit is stated on the unit label The speaker is available as a 15W version only Different sound levels can be obtained by selecting the transformer tap pings in the unit see table below TRANSFORMER POWER TAPPINGS 15W 1 2 15 2 3 7 5 3 4 5 1 3 4 2 4 ...

Page 4: ...s your requirements with the Technical Sales Engineers at MEDC 5 CONFORMITY Tested to EN50014 1997 EN50021 1999 EEx nA II T135 C 55 C Tamb 55 C T4 The Declaration of Conformity and the product label carry the ATEX group and category marking II 3 GD Where signifies compliance with ATEX II signifies suitability for use in surface industries 3 signifies suitability for use in Zone 2 G signifies suita...

Reviews: