Operation
Function test
GA 5752 3125 GB 10
21
4
4
Operation
4.1
Function test
DANGER!
Function check!
The product is used in the treatment of patients. Any restriction in the unit's
performance can result in serious complications in treatment.
Perform a complete function check every time before using the unit.
NOTE
Connecting several septic fluid jars in series can cause delayed suction effect and
reduced suction power.
Perform a complete function check of the tapping unit prior to use. During functional testing, pay
attention to the following conditions:
Version A: Tapping unit with integrated gas pin
• The tapping unit is correctly plugged into the terminal unit.
Version B: Tapping unit with rail clamp and NIST connection
• The gas probe of the connection tube is seated correctly in the terminal unit.
• The NIST connection to the tapping unit has no leak.
• The tapping unit is locked firmly to the equipment rail.
All versions:
• The overflow protection device and the hydrophobic bacterial and viral filter are mounted and
fully functional and no residue is trapped in it.
• The tube connectors are firmly secured and tightly sealed and no mechanical forces are acting
on the tubes.
• The plastic and rubber components are in perfect condition and show no signs of ageing
• A septic fluid jar is connected to the tapping unit.
4.2
Setting the flow
DANGER!
Infection hazard!
In the event of oversuction, the hydrophobic bacterial and viral filter must no longer
be used.
Replace the hydrophobic bacterial and viral filter with a new one.
WARNING!
Flow rate setting!
Make the flow rate settings very carefully! The regulating mechanism is sensitive.
WARNING!
Overflow protection device!
If the overflow protection device closes during operation, the overflow protection
device, complete with lid, must be removed and a new overflow protection device
must be mounted.
