medalounger Modulax User Manual Download Page 5

           09 of 19

Maintenance

Moving parts always need to be well lubricated to help them move 
smoothly and function correctly. It is possible that during transpor-
tation the lubricant applied can get slightly dried out. Before using 
your recliner for the first time we therefore recommend to apply 
a lubricant to the footrest. This is something that is good to do for 
your recliner approximately once every six months. 

Please see below for the areas of application:

Charging 

•   It takes approximately 8 hours to fully charge the battery from 
empty.
•   

PLEASE NOTE         ONCE YOUR RECLINER IS FULLY CHARGED, 

YOU MUST TAKE OUT THE CABLE! DO NOT LEAVE THE RECLINER 
PERMANENTLY CHARGING!

(for recliners with chargeable battery only)

All 3-motor Modulax recliners are also available with a power lift 
mechanism! This raises the whole chair to help you stand up with 
minimum stress to your body.

Please note:

1. When the lift function is activated, the turning base will 
automatically stop rotating for your safety.
2. The usual 3rd motor function with ‘heart balance position’ is 
replaced by the lift function. It is not possible to have both in the 
same recliner.

Power Lift Mechanism

Summary of Contents for Modulax











Reviews: