Med-link Electronics AM-806VB, Instructions For Use Manual, Page: 10 / 16

13 14
2.5 Menu Setting
Table 1
：
Instruction for Menu Setting
Power
“on” and
“off”
Function
Instruction for operation Figures
Power on
Turn on the device by pressing the multi-function
button “ ”.
Power-off setting
Press and hold the multi-function button to enter
the setting interface “Alm Setup 1”.
Short press the button, move the cursor to select
the item “power off”, and then long press the button
to turn the power off.
Note
The device will power off automatically within 8
seconds when there is no any signal input(without
connecting to a reusable body cavity temperature
probe for animal).
Entry and
exit of the
setting
interface
Entry of the interface
Long press the button to enter the interface
of settings. To switch to the new settings interface,
continue to press and hold this button. Settable
parameters include upper and lower limits of
SpO2, pulse rate and temperature, the on-off of
sound, default setting and power off.
Exit of the interface
Short press the button, move the cursor to select
the item “Exit”, long press the button to return to
the testing interface.
“ ”
“Alm” on
or off
setting
“Alm” on or off setting
● On the “Alm Setup 1” interface, press the multi-
function button to move the cursor to “Alm”, then
press and hold the multi-function button to select
“on” or “off” to turn the prompt function on or off.
●
Short press the button, move the cursor to “Exit”,
and then long press the button to return to the
testing interface.
“Beep”
on or
off setting
“Beep” on or off setting of pulse sound
Short press the button on the “Alm Setup 1”
interface, move the cursor to select “Beep”, and
then long press the button to turn the function on or
off.
Default
setting
Default setting
Short press the multi-function button on the “Alm
Setup 1” interface, move the cursor to “Restore”,
then long press the button to return the device to
default setting. After completing the setting, the
interface will indicate “OK”.
Move the cursor to select “Exit” by short pressing
the button, and then long press the button to return
to the testing interface.
Setting of
SpO2
upper limit
Setting of SpO2 upper limit
Long press the multi-function button to enter the
setting interface of “Alm Setup 2”. Short press the
button, move the cursor to select the item “SpO2
Alm Hi”, long press the button to adjust the
parameter of SpO2 in the scope of 52% to 100%.
Setting of
SpO2
lower
limit
Setting of SpO2 lower limit
Long press the multi-function button to enter the
setting interface“Alm Setup 2”, short press the
function key to move the cursor to “SpO2 Alm Lo”,
then long press the multi-function button to set the
lower limit within the scope of 50% to 98%.
Setting of Pulse Rate (PR) upper limit
Long press the button to enter into the interface
of “Alm Setup 2”, short press the button to move
the cursor to “PR Alm Hi”, then long press the
button to adjust the parameter of BPM in the
scope of 32-250bpm.
Setting of
Pulse Rate
(PR)
lower limit
Setting of
Pulse Rate
(PR)
upper limit
Setting of Pulse Rate (PR) lower limit
Long press the button to enter into the interface
of “Alm Setup 2”, short press the button to
move the cursor to “PR Alm Lo”, then long
press the button to adjust the parameter of
BPM in the scope of 30-248bpm.
Settings
Alm Setup 1
Alm on
Beep off
Power off
Restore ok
Exit
*
Settings
Alm Setup 1
Alm on
Beep on
Power off
Restore
Exit
*
Settings
Alm Setup 2
100
94
130
50
+/-
Exit
SpO2 Alm Hi *
SpO2 Alm Lo
PR Alm Hi
PR Alm Lo
+
Settings
Alm Setup 2
100
94
130
50
+/-
Exit
SpO2 Alm Hi
SpO2 Alm Lo *
PR Alm Hi
PR Alm Lo
+
Settings
Alm Setup 2
100
94
130
50
+/-
Exit
SpO2 Alm Hi
SpO2 Alm Lo
PR Alm Hi *
PR Alm Lo
+
Settings
Alm Setup 2
100
94
130
50
+/-
Exit
SpO2 Alm Hi
SpO2 Alm Lo
PR Alm Hi
PR Alm Lo *
+
Settings
Alm Setup 1
Alm on
Beep off
Power off
Restore ok
Exit
*
Settings
Alm Setup 1
Alm on
Beep off
Power off
Restore ok
Exit
*
Settings
Alm Setup 1
Alm on
Beep off
Power off
Restore ok
Exit
*
Function
Instruction for operation Figures