8
Telephone: 0800 121 4626 www.tensmachineuk.com
OPERATING INSTRUCTIONS
Using you TENS in Obstetric (Maternity) mode
A. Insert the 9v battery provided into the battery
compartment as shown in Fig1 and fit the battery cover
back in place
B. Now turn on the TENS by pressing the On-Off
button in the bottom left hand corner of the
device
C. You will now see the display as shown in Fig2
The Mums to Be TENS & Muscle stimulator is very simple to
use, pressing the mode button will change the programme
from P1 to P12 each single press of this button changes the
programme from P1 to P2, P3 etc to P12. If at any stage you
require to go back to P1 please hold the mode button for
approx. 3 seconds and the device will re-set at P1.
The obstetric programmes are P1 and P2. The Boost Button
is located on the right hand side of the TENS device as shown
in Fig3
Pressing the boost button to the on position, the display is as
shown in Fig4. Pressing the boost button to the off position
and the display is as shown in Fig5
Once you have familiarised yourself with these features you
are now ready to connect the patient leads and position the
self-adhesive electrodes as shown.
Fig1
Fig2
Fig3
Boost
Button
Fig4
Fig5
MATERNITY MODE