MED-EL AudioLink Ma070301, User Manual

Page: 9 / 44

AudioLink
7
Using AudioLink for the first time
Assembling AudioLink
To assemble AudioLink, proceed as follows:
❶ Your AudioLink is delivered disassembled.
❷ Attach the battery to the main unit, starting at the
bottom at a 45° angle.
❸ Starting at the bottom, press the two parts together
until the battery fully snaps into the main unit.
AudioLink is now switched on. This is indicated by the
status light slowly pulsing green.
❹ Optional: Connect the AudioLink clip to AudioLink
by aligning the clip with the back of AudioLink and
applying pressure until the designated holes in the clip
snap into place.
❺ Optional: To attach the lanyard, remove the AudioLink
clip from AudioLink by slightly lifting one side of the
clip with your fingernail or with the AudioLink opening
tool. Insert the thin string of the lanyard into the hole
of the AudioLink clip and thread the other end of the
lanyard through the resulting loop. Tighten the loop
and reattach the AudioLink clip to AudioLink.