MED ASSOCIATES INC.
VIDEO ZERO MAZE
- 4 -
Maze Hardware
1. With the base in the desired location (the assembled maze is large and difficult to
relocate), install all four legs as shown in Figure 4.
2. Place the Zero Maze runway on top of the legs, as shown in Figure 4.
Figure 4 - Maze Base Assembly
3. Locate the two uprights. Slide the uprights into the ends of the crossbeam. One of
the uprights has a cable clamp, and should be oriented as shown in Figure 5.
4. Secure the uprights in place using the supplied pins.
5. Connect the light cable to the To Lights connector on the bottom of the ENV-560-L,
which is mounted on the maze upright.
Figure 5 – Connecting the Uprights to the Crossbeam
DOC-014 Rev 1.3 Copyright © 2013
MEd Associates. Inc