MED ASSOCIATES INC.
MED-APA SHUTTLE BOX PACKAGE
- 3 -
DOC-015 Rev 1.4 Copyright © 2013
SmartCTRL Interface and Power Supply
Before connecting components, turn off the power on the computer and the interface cabinet.
Install the SmartCTRL Interface Card(s) in sequence, starting with Box 1 on the leftmost slot next
to the Decoder card. Make sure the ports and address offsets are set according to the
instructions in DOC-013
SmartCtrl Manual
.
Connect the SmartCTRL card to the Control Panel using an SG-210CB Serial Port cable. Provide
28 Volts to the Control Panel from the SG-6080D using an SG-210CP-25 Cable. See Figure 2-2.
Figure 2-2 – Connect the DIG-704PCI-2 to the DIG-700G Decode Card.
SG-210CB Serial Port Cable
SG-210CP-25 Cable