RTU Modbus interface : MPNC006 Mect srl
15
ME7084_05 07/21
Figure 15: Node address settings (ID)
Turn the device off and on again to make the changes effective.
3.5.2
Baud Rate settings
On the MPNC006 you can set 4 different baud rates. The baud rate is set via the DIP
switches 1 to 2. The permitted baud rate values are shown in the following table.
Switch settings
Baudrate
S-1
S-2
0
0
9600
0
1
19200
1
0
38400
1
1
57600
Figure 16: Baud rate setting
Turn the device off and on again to make the changes effective.
