9
ADJUSTMENT
Adjust the coin mech:
Descriptions:
1): Please take out the plastic coin from sample coin chute and replace it with token.
2): Remove the screws on back of coin entrance. Adjust the fixing chip on back of coin
entrance according to the token’s diameter, which prevent blocking the coin mech as
inserting the large coin in by mistake.
3): Turn the COIN Switch to “NO” (COIN Signal wire and GND should be disconnected at
usual time). Turning switch can be used as the coin mech switch when the game is power
on.
4): Adjust the adjusting switch of COIN Signal wave length to 50MS.
5): Adjust the micro-adjusting resistance of token tolerance. Clockwise: increasing the
sensitivity of token tolerance, that is, the range of accepting the token tolerance will be
larger. Counterclockwise: decrease the sensitivity, that is, the range will be smaller and
choose the token more strictly
adjusting chip of entrance
coin reject bar
COIN signal wavelength
adjusting SW
COIN signal SW
power/signal input
micro-adjust resistance
sample coin chute
DC+12V
S
TR
IC
T
S
LA
CK
S
en
si
ti
vi
ty
+
-
C
O I
N
R
e m
o v
e
R E
P
L A
C E
B a
c
k w
a
r d
SW3
100ms SLOW
25ms FAST
NOM
normal
MGN
accurate
50ms MEDIUM
WHITE
C/-)
GROUND
N.C.
SW1
SW2
N.O.
COUNTER(-/+)
COIN SIGNAL
GRAY
BLACK
RED
GRAY
Summary of Contents for HAPPY CAR
Page 1: ...HAPPY CAR MANUAL ...
