MECNOSUD IM 12AD, Operating Manual

Page: 15 / 25

37
ENGLISH
3.3 Working test machine
Single-phase or three-phase machine (mod. IM 5 - IM 8):
OPERATING: push the green button A to start the bowl and the spiral.
STOP: push the red button to stop the bowl and the spiral.
Single-phase or three-phase machine (1-2 vel.) (from mod. IM 12 to mod. IM 60)
OPERATING: rotate the knob of the switch C in position 1, set the time of mixing by the timer F,
push the green button D to start the bowl and the spiral.
STOP: rotate the knob of the switch C in position 0, or push the red button E to stop the bowl and
the spiral. In order to operate the machine again after the stop due to the raising of the protection
I or to the activating of the emergency button E it is necessary to proceed as follows: lower again
and completely the protection I; release the button E by rotating in clockwise, as shown by the
arrow, and push the operating button D.
Note: In a machine fed electrically by three-phase, if the rotation of the bowl is opposite the way
shown by the arrow it is necessary to follow these indications for the functioning and every time you
change the electric plug:
· Stop the machine.
· Take the plug out.
· Reverse on the plug the position of two phases (example: L1 with L2 and vice versa).
· Restart the machine and verify if the bowl is rotating the right way.
Start the machine without using it, let it on for about one minute and verify that it is functioning perfectly.