Vortex-dV Operating Manual
Mecmesin
9
The multi-function selector buttons
A: Test readiness
No AFTI connected
Start test sequence (
B
)
Go to jog mode (manual motor control) (
D
)
Go to settings (
E
)
B: Testing
Interrupt test. This stops drive spindle movement, leaving the stand in a
state of test readiness, with ‘Interrupted: User’ displayed. The start button
will restart, not resume, the test sequence.
C: Stopped
Emergency stop button pushed. Message: ‘Emergency Stop’. Release the
emergency stop to regain control and remedy the situation before resuming
testing.
If this button is pressed, the message is ‘Interrupted: User’, and the test
readiness buttons (
A
) are displayed.
The Start test button resumes testing. Cyclic testing returns to the first cycle
action.
Important! Under torque load control, the AFTI MUST be reset
first.
D: Motor control
Shows clockwise and anticlockwise speeds as set
Zero (tare) angular displacement of the drive spindle
Summary of Contents for Vortex-dV 1.5 N.m
Page 1: ...Vortex dV Motorised Torque Testing System Operating Manual 431 468 02 May 2018 ...
Page 4: ...iv Mecmesin Vortex dV Operating Manual ...
Page 21: ...Vortex dV Operating Manual Mecmesin 17 Declaration of Conformity ...
Page 22: ...18 Mecmesin Vortex dV Operating Manual ...
