Mecmesin MultiTest-0.5i, Operating Manual

Page: 10 / 34

6 
Mecmesin
A Guide to Safe Use of Mains Powered Test Systems
3. Using Your Test System
3.1 Interlocked Enabled Test Systems
All MultiTest-i and –xt single column systems supplied from June 2019
onward will be interlock enabled from the factory as standard. All single
column systems will eventually be interlock enabled from factory. An
interlock override plug (351-102) will be supplied in the accessories
packaging of these test systems.
MultiTest single column systems being used without an interlock guard
fitted, must have the interlock override plug (351-102) fitted to the rear
interlock connection in order to operate the test system.
▲ Interlock Override Plug (351-102) ▲ Single Column Interlock Connection
If the MultiTest system is being used with an interlock enabled guard, then the interlock
override plug is not required to be fitted, as the interlock guard wiring should be
connected instead. Refer to Installation and Operation of Mecmesin Interlocked Guarding
manual (part number 431-971)
▲ Interlock Guard Cable Connected on MultiTest Single Column