Mecmesin MAHR MSP2, Instructions For Use Manual

Page: 9 / 12

page 8
f) Setup Transmission parameters as:
Baud Dat Par Stp
9600 8 N 1
Use or buttons to change selected parameter
Use or buttons to select the next parameter
Note: Baud does not have to be 9600 but it should be setup to be the same as the
baud rate on the Mecmesin Instrument
(See Instrument operating manual for details)
Press ENTER button to confirm transmission parameters.
g) Save settings
Save ?
yes
Use or buttons to change value selected to yes
Press ENTER button to save all settings.