manualshive.com logo in svg

MECHLINE AQUAJET AJPR50-2, Installation & Care Instructions

Share
Download
MECHLINE AQUAJET AJPR50-2 Installation & Care Instructions Download Page 2

installation

 

&

 

care

 

instructions

REVISION: 04/2018  |  page 2 of 4

AquaJet Pre-Rinse Products

AJPR50 INSTALLATION

  1.1  Remove the transit screws before installation. 

  1.2  Measure and mark any guides for mounting at a height of 1120mm from sink top to allow for an  
   

adequate air break gap, to prevent potential water back flow. 

  

NOTE: The pre-rinse hose coils will relax with use and allow the gun to hang slightly lower.

Summary of Contents for AQUAJET AJPR50-2

Page 1: ...is fitted to the hot cold supplies Ensure supply pipes are properly sized to avoid problems with flow rate pressure loss or water hammer We recommend the installation is protected with water filters water hammer arrestors and water pressure reducers as required Do not install where there is the possibility of the water supplies freezing Recommended minimum water pressure 1 5 Bar 22 5psi Maximum wa...

Page 2: ...ATION 1 1 Remove the transit screws before installation 1 2 Measure and mark any guides for mounting at a height of 1120mm from sink top to allow for an adequate air break gap to prevent potential water back flow NOTE The pre rinse hose coils will relax with use and allow the gun to hang slightly lower ...

Page 3: ...nnect the water hose to the water inlet isolation valve using a thread sealing compound or PTFE tape IMPORTANT Do not twist valve during installation To ensure a secure fit use a 24mm spanner to hold the valve in place when tightening hose to valve 1 5 Test unit for water leaks 1 6 The gun hook is used to store the gun out of the way when not in use Install in an appropriate position that is conve...

Page 4: ...nsions shown in mm unless otherwise stated Product accreditation may not apply to all products in the relevant range Please contact Mechline to confirm Unless otherwise stated all products carry a warranty of twelve 12 months against manufacturing defect or workmanship on parts with no inclusion for labour or site attendance 04 2018 AJPR50 2 MANUAL MAINTENANCE CLEANING Ensure isolation valve is al...

Reviews:

No comments

Brands by name

Popular brands

Load more brands