INSTALLATION USING THE NON WELDING TYPE OF HARDWARE
This type of metallic hardware, non welding, is supplied on request: for the installation follow the same instructions as per the
welding type hardware.
RELEASING FOR MANUAL OPERATIONS AND FIRST OPEN AND CLOSE TEST
Once completed all the installation steps and APROLI 480 is fitted correctly onto the door, assess that the movements are performed
in a very smooth way without any friction. First make sure that Aproli 480 be released for the first manual test and be well balanced.
Add extra counterbalance if necessary. The door must be able to stay balanced in any position it is stopped.
English
It is recommended that the telescopic
arms be lubricated along the sliding
surface into the tubular section
30x30
25x25
It should be able
to stay still in any
positions
Counterbalance
Pic. 14
Pic. 15
9
Oil-hydraulic operator for tilt-up doors with counterbalance
APROLI 480
GREASE
GREASE
istr_aproli480_GB.ai 9 26/09/2018 15:59:30
