background image

 
 
 
 
 
 
 
 
 
 
 

READ THIS MANUAL  
     CAREFULLY 

 

1.

 

FOREWORD – IDENTIFIC. AND MARKING    PAG. 1   

2.

 

CONDITIONS-USE - WARRANTY   

  PAG. 2 

3.

 

SAFETY WARNINGS  

 

 

 PAG. 3-4

4.

 

START – WARNING/DRIVING SIGNS 

 PAG. 5 

5.

 

DIMENSIONS – PACKAGE - TRANSPORT 

 PAG. 6 

6.

 

CONTROLS –   START-UP 

 

 PAG. 7 

7.

 

SAFETY DEVICE–PRESSURE–CONTROLS    PAG. 8 

8.

 

HANDLEBAR ADJUSTM.- OIL REPLACEM.   PAG. 9 

9.

 

LUBRICATION – IMPLEMENTS 

 

 PAG. 10 

10.

 

ROTARY HOES – MOWER BAR APPLIC. 

 PAG. 11 

11.

 

ADJUSTMENTS – ASSEM./DISASSEMBLY   PAG. 12 

12.

 

USE OF MOTOR CULTIVATOR 

 

 PAG. 13 

13.

 

MAINTENANCE AND USE  

 

 PAG. 14 

14.

 

NOISE AND VIBRATIONS 

 

 PAG. 15 

15.

 

DECLARATION 

   

PAG. 

16 

 

   

 

GB 

03/05

 
 
 
 
 
 
 
 

MOTOR CULTIVATOR MF 223 REVERSIBLE 

 
 
 
 
 
 

USER’S MANUAL 

 
 

1 - FOREWORD

INDEX 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

This symbol is used to highlight 
 an important safety information.
 If this information is ignored,  
people are in danger either of  
possible injures – even serious 
 ones – or death. 
 

IMPORTANT 

This term highlights special  
precautions to be taken in  
order not to damage the  
machine.

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

All right reserved 

 

This manual cannot be  
either reproduced or 
 released without  
the manufacturer’s  
prior written consent. 

 

PRINTED IN  ITALY 

 
 
 
 
 

2 - MACHINE IDENTIFICATION AND MARKING

 
The machine serial number is printed on the drive box. 

 

IMPORTANT NOTE  

 

Always mention the machine serial number when calling 
 our technical service or when ordering spare parts. 

 

MARKING 

The CE mark is on the handle support as this example   

 

 

                     Marking example. 

Summary of Contents for MF 223

















Reviews: