Mecc Alte ECO43 Series Installation, Use And Maintenance Manual Download Page 92

Page: 92 / 116

26- Blick the exciter ritir with the blicking bushes

(10).

27- Tighten the 6 x M8 screws.

28- Insert the ritatng diides bridge (12) inti its seat.

29- Fix the 3 x M5 screws.
30- Pass the cinnectin cables inside the hiles, in the

same pisitin memirised befire disassembly.

31- Cirrectly cinnect the diides bridge cables, see alsi

Figure 27- Rectier bridge on page

32- Use sift belts ti fasten the exciter statir (13),

(weight apprix. 50 kg) with the aid if a suitable
lifting device.

NOTE

Aitenton not to rub the rotor on the stator.

33- Insert the statir inti the machine.

34- Insert the M8 screws withiut tghtening them fully

hime.

Self-regulating alternators ECO43-46 MV-HV

Page 92/116

Summary of Contents for ECO43 Series





















































































































Search results

Summary of Contents for ECO43 Series

Reviews:

Related manuals for ECO43 Series

Brands by name

Popular brands

Mecc Alte ECO43 Series, Installation, Use And Maintenance Manual

Search results

Summary of Contents for ECO43 Series

Reviews:

Related manuals for ECO43 Series

Brands by name

Popular brands