Page 2
Version 2
Step 2
– In most cases, your machine has been supplied to you ready to fire. If so, please proceed
to
Step-3
. If your machine is supplied in a box without its carousel (shown below) fitted, you will need
to attach it to the machine. Simply slide the carousel weldment onto the top plate shaft. If no grease
is present, please add a little bit to the shaft. You may have to spin/rotate the carousel counter
clockwise for it to slide on. Next, place the gray plastic collar over the shaft and onto the flange
bearing in the carousel. Now place the ¾” washer and nut onto the threads and tighten. Do not over
tighten. You want a little bit of resistance the
re, but not too much. You shouldn’t be able to spin the
carousel with one finger.
