Page 20
92555
June 1, 2012
Crossover Series
Crossover Series
Operating Instructions & Function Tests
Optional Material Clamps/Pipe Racks
• Material Clamps/Pipe Racks may be used only on the 47” (1.2 m) deck equipped with the Sheet
Material Rack. DO NOT use on the optional 55” (1.4 m) wide deck.
• The Material Clamps/Pipe Racks may be used only on the Sheet Material Rack side of the platform.
DO NOT use on the side opposite the Sheet Material Rack.
• All material must be centered.
The optional Material Clamp/Pipe Rack allows the user to hold sheet material in place without
the use of straps, or by inverting the clamps, to carry pipe or other long material.
Mount the clamps approximately 8 inches (20 cm) from the ends of the guard rails, above the
Sheet Material Rack. Move the clamps closer together as needed to enable the use of both
clamps on shorter material.
Material Clamp Use
Remove the J-shaped arms from the Material Clamps when loading material on the Sheet
Material Rack.
When all material is loaded, replace the J-shaped arms as shown and secure them in place with
the snap pins.
ART_404
3
