MEC
– Energietechnik GmbH
INSTRUCTION MANUAL
161-150-430
Vers.: 30032010
Page 4 of 4
GLN: 9008390331330
6. Errors and Troubleshooting
Red Power-LED does not light:
- Check if the mains plug is correctly plugged in
- Check if mains cable is defective
Red Control-LED blinking:
- Defective or deep-discharged battery connected
Proper disposal of the battery
- Check if the red (+) and black (-) alligator clips are correctly connected to the battery
Constant lightning of red Error-LED:
- Check the polarity of the battery
- Check the voltage of the battery
Red Error-LED blinking:
- check if a defect or deep discharged battery is connected
- check if the red and the black clamps are connected
7. Technical Specifications
Input:
100-240 VAC 50/60 Hz
Power max.:
150 W
Appliance inlet:
IEC 60320-C14
Mains cable:
IEC 60320-C13 cable with country-specific plug
Charging technology:
Configurable charging profile
Output nominal:
12/24V, 4-10A
Efficiency:
> 85% (at 230 VAC)
Cooling:
Load dependent fan
Temperature sensor:
Intern (extern optional)
Temperature range:
0°C
– 40°C
Dimensions:
180x112x42mm / 1020g
Scope of delivery:
Charger, country-specific power cable, operation manual
Delivery status is a standard (3-step) charging profile which can be changed from
your distributor according to your specifications.
8. Advice for Disposal
It is prohibited to dispose the charger into the house- and residual waste removal
(WEEE-Richtlinie 2002/96/EG und EAG-VO) , it must be disposed at the according
collection points. For the protection of our environment please inform yourself at your
communal adminstrative agency about your nearest disposal point.
The charger equates to the RoHS-directive 2002/95/EG, for the restriction of the use of
certain hazardous substances in electrical and electronic equipment.
9. Disclaimer of Warranty
MEC-Energietechnik GmbH guarantees replacement or repair of chargers that are recognized as defective
within 2 years under common environmental conditions. The validation of the warranty time starts with the de-
livery date from the manufacturer. MEC-Energietechnik GmbH is limiting the free guaranteeing to working hours
and spare parts only.
For damages caused by non-observance of the operating instructions, inappropriate start up or handling as well
as reconstructions and modifications of the device, the warranty claim expires and MEC-Energietechnik GmbH
assumes no liability for consequential damage to property or persons!
Repair work must only be accomplished by authorized companies or professional staff!
Subject to technical modifications. We assume no liability for misprints.
MEC-Energietechnik GmbH, Dorfstraße 2, A-9542 Afritz am See / www.mec-energietechnik.com
