www.measy.kz
model: WHD/LKV-388A User Manual
www.measy.kz
Page 4
1 Power led
It lights when power is on
2 Data transmission led
Led blinks slowly when it is building connection.
Led blinks fast when it is successfully connected and transmitting data.
3 Connection led
It lights when wireless signal is well connected.
4 Power input
Connect with DC5V2A power adapter
5 Reset
Press reset button to restart the device
6 HDMI output
Connect with HDMI display device
7IR receiver extension
cable interface
Connect with IR receiver extension cable. Please make sure the remote
control is within the required range of IR receiver.
８Antenna
Launch wireless signal
6.Connection
1). Connect HDMI input with HDMI source device and connect IR blaster extension cable with IR OUT interface of the
sender (TX).
2). Connect HDMI output with HDMI display device and connect IR receiver extension cable with IR IN interface..
3) Power on the device (power led lights) and it works.
Note:
When the wireless signal transmits through wall, glass or other obstacles, it will cause signal loss. Suggest
installing this device in good environment with few obstacles.
The external environment wireless signal interfere the transmission, such as micro waver, wireless mouse and
keyboard etc.
7.FAQ
Q: TV display “waiting for connection...” on the bottom right corner?
