13
Chapter 4
Specifications
Typical for 25 °C unless otherwise specified.
Specifications in
italic
text are guaranteed by design.
Wireless communications
Table 1. Wireless communications specifications
Communication standard
IEEE 802.15.4, ISM 2.4 GHz frequency band, non-beacon, point-to-point
Range
Indoor/urban: Up to 150' (50 m)
Outdoor RF line-of-sight: Up to 1/2 mile (750 m)
Transmit power output
10 mW (10 dBm)
Receiver sensitivity
-100 dBm (1% packet error rate)
RF channels
12 direct sequence channels available, channels 12 – 23 (2.410 – 2.465 GHz)
(software selectable)
Addressing
16-bit PAN (personal area network) IDs per channel (software selectable)
64-bit device address
Encryption
128-bit AES (software selectable)
Note 1:
Contains FCC ID: OUR-XBEEPRO. The enclosed device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (
i.
) this device may not cause
harmful interference and (
ii.
) this device must accept any interference received, including
interference that may cause undesired operation.
Note 2:
Canada: Contains Model XBee-PRO Radio, IC: 4214A-XBEEPRO
Caution!
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance
of 20 cm or more should be maintained between the antenna of this device and persons during
device operation. To ensure compliance, operations at closer than this distance is not
recommended. The antenna used for this transmitter must not be co-located in conjunction with
any other antenna or transmitter.
Memory
Table 2. Memory specifications
EEPROM
256 bytes USB micro for external application use
Microcontroller
Table 3. Microcontroller specifications
Type
High performance 8-bit RISC microcontroller
USB +5V voltage
Table 4. USB +5V voltage specifications
Parameter
Conditions
Specification
USB +5V (VBUS) input
voltage range
4.75 V min. to 5.25 V max.
Summary of Contents for WLS-IFC
Page 1: ......
