USB-2533 User's Guide
Specifications
42
Trigger sources and modes
Table 7. Trigger sources and modes
Input scan trigger sources
Single channel analog hardware trigger
Single channel analog software trigger
External-single channel digital trigger (TTL TRG input)
Digital Pattern Trigger
Counter/Totalizer Trigger
Single channel analog hardware trigger:
The first analog input channel in the scan is the analog trigger channel
Input signal range: -10 V to +10 V maximum
Trigger level: Programmable (12-bit resolution)
Latency: 350 ns typical
Accuracy: ±0.5% of reading, ±2 mV offset maximum
Noise: 2 mV RMS typical
Single channel analog software trigger:
The first analog input channel in the scan is the analog trigger channel
Input signal range: Anywhere within range of the trigger channel
Trigger level: Programmable (16-bit resolution)
Latency: One scan period (maximum)
External-single channel digital trigger (TTL trigger input):
Input signal range: -15 V to +15 V maximum
Trigger level: TTL level sensitive
Minimum pulse width: 50 ns high, 50 ns low
Latency: One scan period maximum
Digital Pattern Triggering
8-bit or 16-bit pattern triggering on any of the digital ports. Programmable for
trigger on equal, not equal, above, or below a value. Individual bits can be
masked for “don’t care” condition.
Latency: One scan period, maximum
Input scan triggering modes
Counter/Totalizer Triggering
Counter/totalizer inputs can trigger an acquisition. User can select to trigger on
a frequency or on total counts that are equal, not equal, above, or below a
value, or within/outside of a window rising/falling edge.
Latency: One scan period, maximum
Frequency/pulse generators
Table 8. Frequency/pulse generator specifications
Channels
2 x 16-bit
Output waveform
Square wave
Output rate
1 MHz base rate divided by 1 to 65535 (programmable)
High-level output voltage
2.0 V minimum @ -1.0 mA, 2.9 V minimum @ -400 µA
Low-level output voltage
0.4 V maximum @ 400 µA
Power consumption
Table 9. Power consumption specifications (Note 5)
Power consumption (per board)
2400 mW
Summary of Contents for USB-2533
Page 1: ......
