Measurement Computing USB-1808-OEM Page 5 User Manual Download

Page: 5 / 29

Preface

About this User's Guide

What you will learn from this user's guide

This user's guide describes the Measurement Computing USB-1808-OEM data acquisition device and lists

device specifications.

Conventions in this user's guide

For more information

Text presented in a box signifies additional information and helpful hints related to the subject matter you are

reading.

Caution!

Shaded caution statements present information to help you avoid injuring yourself and others,

damaging your hardware, or losing your data.

Bold

text is used for the names of objects on a screen, such as buttons, text boxes, and checkboxes.

Italic

text is used for the names of manuals and help topic titles, and to emphasize a word or phrase.

Where to find more information

Additional information about USB-1808-OEM hardware is available on our website at

www.mccdaq.com

. You

can also contact Measurement Computing Corporation with specific questions.



Knowledgebase: kb

.mccdaq.com



Tech support form:

www.mccdaq.com/support/support_form.aspx



Email: [email protected]



Phone: 508-946-5100 and follow

the instructions for reaching Tech Support

For international customers, contact your local distributor. Refer to the International Distributors section on our

web site at

www.mccdaq.com/International

Summary of Contents for USB-1808-OEM






























Search results

Summary of Contents for USB-1808-OEM

Reviews:

Related manuals for USB-1808-OEM

Brands by name

Popular brands

Measurement Computing USB-1808-OEM, User Manual

Search results

Summary of Contents for USB-1808-OEM

Reviews:

Related manuals for USB-1808-OEM

Brands by name

Popular brands