background image

 

Preface 

About this User's Guide 

What you will learn from this user's guide 

This user's guide explains how to install, configure, and use the PCI-DAS-TC so that you get the most out of the 
thermocouple/voltage input features.  

This user's guide also refers you to related documents available on our web site, and to technical support 
resources. 

Conventions in this user's guide 

For more information on … 

Text presented in a box signifies additional information and helpful hints related to the subject matter you are 
reading.  

Caution!

 

Shaded caution

 

statements present information to help you avoid injuring yourself and others, 

damaging your hardware, or losing your data.  

< : > 

Angle brackets that enclose numbers separated by a colon signify a range of numbers, such as those assigned 
to registers, bit settings, etc.  

bold

 text 

Bold 

text is used for the names of objects on the screen, such as buttons, text boxes, and check boxes. For 

example: 

1.

   Insert the disk or CD and click the 

OK

 button.

 

italic

 text 

Italic

 text

 

is used for the names of manuals and help topic titles, and to emphasize a word or phrase. For 

example: 
The 

Insta

Cal installation procedure is explained in the 

Quick Start Guide

Never

 touch the exposed pins or circuit connections on the board. 

Where to find more information 

The following electronic documents provide information relevant to the operation of your PCI-DAS-TC. 

 

MCC's 

Specifications: PCI-DAS-TC

 (the PDF version of the 

Specifications

 chapter in this guide) is 

available on our web site at 

www.mccdaq.com/pdfs/Specs/PCI-DAS-TC-spec.pdf

. 

 

MCC's 

Quick Start Guide

 is available on our web site at  

www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf

. 

 

MCC's 

Guide to Signal Connections

 is available on our web site at  

www.mccdaq.com/signals/signals.pdf

. 

 

MCC's 

Universal Library User's Guide

 is available on our web site at  

www.mccdaq.com/PDFmanuals/sm-ul-user-guide.pdf

. 

 

MCC's 

Universal Library Function Reference

 is available on our web site at  

www.mccdaq.com/PDFmanuals/sm-ul-functions.pdf

.

 

 

MCC's 

Universal Library for LabVIEW

 User’s Guide 

is available on our web site at 

www.mccdaq.com/PDFmanuals/SM-UL-LabVIEW.pdf

PCI-DAS-TC User's Guide

 (this document) is also available on our web site at 

www.mccdaq.com/PDFmanuals/PCI-DAS-TC.pdf

. 

 

Summary of Contents for PCI-DAS-TS





















Reviews: