Measurement Computing Data Translation DT3010 Series, User Manual, Page: 197 / 232

Appendix B
196
Connector J2 on the DT3010, DT3010/32, and DT3016
Boards
Table 38 lists the pin assignments of connector J2 on the DT3010, DT3010/32, and DT3016
boards.
Table 38: Connector J2 Pin Assignments on the DT3010, DT3010/32, and DT3016 Boards
Pin Signal Description Pin Signal Description
1 + 5 V Output 2 + 5 V Output
3 Reserved 4 A/D Sample Clock Output
5 A/D Trigger Output 6 External A/D TTL Trigger
7 External A/D Sample Clock
Input 8 External D/A TTL Trigger
9 External D/A Clock Input 10 User Counter Output 3
11 User Clock Input 3 12 User Counter Output 2
13 User Clock Input 2 14 User Counter Output 1
15 User Clock Input 1 16 User Counter Output 0
17 User Clock Input 0 18 Digital Ground
19 Digital I/O Bank B 3 20 Digital I/O Bank B 2
21 Digital I/O Bank B 1 22 Digital I/O Bank B 0
23 Digital Ground 24 Digital I/O Bank A 3
25 Digital I/O Bank A 2 26 Digital I/O Bank A 1
27 Digital I/O Bank A 0 28 Digital Ground
29 Dynamic Digital Output 1 30 Dynamic Digital Output 0
31 Reserved 32 Reserved
33 Shield Ground 34 Analog Trigger
35 Digital Ground 36 Digital Ground
37 Reserved 38 Digital Ground
39 Digital Ground 40 Digital Ground
41 Digital Ground 42 Digital Ground
43 Digital Ground 44 External Gate 3
45 Digital Ground 46 External Gate 2
47 Digital Ground 48 External Gate 1
49 Digital Ground 50 External Gate 0
51 Digital Ground 52 Digital Ground
53 Digital I/O Bank B 7 54 Digital I/O Bank B 6