Mean Well LCM-40EO Instruction Manual Download Page 4

Page: 4 / 6

MEAN WELL EUROPE B.V.

Langs de Werf 8, 1185 XT Amstelveen
The Netherlands

Tel: +31 (0)20 758 6000

Fax: +31 (0)20 758 6001

Web: www.meanwell.eu

4 |

P a g e

J a n 2 0 1 6

If the LCM-40/60EO is detected properly, select the device and click the “Add Devices To Workspace”
in green color.

Figure 6. Navigan software interface.

Click the “Refresh” button to show the information about the linked devices on the right.

Click the “Add links” button in green color to show the information about the linked devices on the
right.

Physically press on the switch or rocker

and it will be detected and shown in the Navigan software.

Summary of Contents for LCM-40EO

Page 3: ...well eu 3 P a g e J a n 2 0 1 6 Figure 4 Navigan software shows the USB stick is connected successfully Enter the project name to start For first time user tick the Enable Walk Through Mode for the introduction mode Click the Discover Controllers button in green color to detect the LCM 40 60EO from the environment Figure 5 Navigan software interface ...

Page 5: ...anwell eu Web www meanwell eu 5 P a g e J a n 2 0 1 6 Figure 7 Navigan software interface Select the device and click the Link Selected in green color It will show message 1 item successfully linked in green color Click the Done to leave and close the window Now the linked switch or rocker can Turn ON OFF and dim the LED driver ...

Page 6: ...l eu Web www meanwell eu 6 P a g e J a n 2 0 1 6 Figure 8 Navigan Advanced Parameters There are more parameters to optimize the system performance in the Configuration tab For example the Dimming speed shown in Figure 8 After changing the parameters click Upload to save it into LED driver For more information contact info meanwell eu ...