47
Click the
Use the following IP address
and then type
“
”
addresses in
IP address ,
Subnet mask
and
Default
“
” “
”
“
gateway
boxes, after that click the
OK
button. The IP
”
“
”
address you set should be in the same domain as CMU2 but not
the identical IP. Here is an example below for your reference.
Address
Default (for ex.)
IP address
169.254.1.2
Subnet mask
255.255.0.0
Default gateway
169.254.1.1
5
Only connect the PC to the CMU2 and make sure there is no
other devices connected to the PC.
Click the "Network and Internet Connections" option. Then click
the "Local Area Connection". Select "Internet Protocol (TCP/IP)",
and then click the "Properties" button. If there are "Internet
Protocol Version 4 (TCP/IPv4)" and "Internet Protocol Version
6(TCP/IPv6)" shown on the table, choose "Internet Protocol
Version 4 (TCP/IPv4)".
1
2
3
48
Check if it is working correctly by clicking the
Support
.
“
”
If the addresses presented as you typed, it is successfully
done. Then you can access the built-in web page.
5
4
