Meade WTS 1.0, Setup Manual, Page: 10 / 16

10
7.
Enter an IP address for this product.
· When using DHCP/BOOTP server etc. please click
Get iP Address
Automatically. Click Assign iP Address. Enter an IP address and
click next.
8.
When you will use Meade Wireless Telescope Server in the
wireless LAN, select the wireless network that you wish to
use from the list, enter the wireless network key and click
next.
· Enter the wireless configuration information prepared in
advance.
If the wireless network that you wish to use is not shown in
the list, click
Detailed Config and configure each setting.
For Detailed Config , please refer to the online manual.
If you are going to use Meade Wireless Telescope Server
with a network cable instead of wirelessly, upon comple-
ting the configuration, check
Skip wireless
configuration and click next .
9.
Please confirm the configuration parameters and click
Execute.