G
H
I
F
E
D
D. Funnel-shaped top with battery compartment
Contains battery compartment and rainfall counting electronics
E. Battery compartment
Holds two AA-size batteries
F. Screws
Secure battery compartment cover
G. Built-in leveler
Allows leveling rain gauge on uneven surfaces
H. Bucket see-saw mechanism
Collects the rainfall in one of its containers and self-empties once full
I. Protective screen
Protects the rain gauge funnel from debris
Battery installation
• Unlock the funnel-shaped top on the rain gauge by turning both knobs on the sides in a Counter-clockwise
direction.
• Remove the funnel-shaped top lifting it off the rain gauge bucket.
• Remove 7 small screws from the battery compartment cover using a small Phillips screwdriver
• Insert 2 “AA” size alkaline batteries (not included), matching the polarities as shown in the battery
compartment.
• Replace the battery compartment door and secure the screws.
• Insert the funnel-shaped top into the rain gauge bucket and secure it into place by turning the knobs clockwise.
Mounting
• Make sure that the rain gauge bucket is level – check if the ball bearing inside the bucket is at the midpoint of
the leveler.
• Place the protective screen over the top to protect the rain gauge from the debris.
• Mount the rain gauge in place using mounting hardware provided.
• Make sure that the rain gauge is in open area where precipitation falls directly into the gauge’s bucket, ideally
2-3 feet above the ground.
Placement tips
• The rain gauge should be placed in an open area away from walls, fences, trees and other coverings, which
may reduce the amount of rain collected in the bucket. Additionally, trees and rooftops may be sources of
pollen, leaves and other debris.
• To avoid rain shadow effects, place the rain gauge two to four times the height of any nearby obstruction.
• It is important that excess rain can flow freely away from the rain gauge.
7
