TIME AND CALENDER
• Press and hold
MODE
button until the day of week language
abbreviation
“ ”
will flash
• Press the
UP (? )
or
DOWN (? )
selecting the day of the week
in English, German, French, Italian, Spanish, Dutch or Swedish.
• After the language of weekday is set, press
MODE
button to
confirm and move to the next parameter (year)
• Continue setting the year, month, day, time format (12 or 24
hours), local hour and minutes, using the same technique
• After programming is complete the display will return to the
default hour and minutes with seconds display.
CLOCK ALARMS
There are two time alarms – Weekday alarm
( )
and Single
day alarm
( )
- and one Ice Warning Alarm
( )
.
• If
Weekday ( )
alarm is activated, it will sound at the set
time and the alarm icon will flash Mondays through Fridays
• If
Single ( )
day alarm is activated, it will sound at the set
time and the alarm icon will flash only for this specific day and
will not activate on subsequent days
• If
Ice Warning Alarm ( )
is activated, it will sound
at the set time and alarm icon will flash once the remote
temperature for Channel One (1) will reach 32°F(0°C) and
below
NOTE: Ice Warning Alarm can be set only if Weekday
and/or the Single alarm are programmed.
SETTING THE WEEKDAY ( ) AND SINGLE DAY
( ) ALARMS
• Press
ALARM
button once to enter into the alarms setting
mode. The default alarm is a Weekday alarm
( )
. The
abbreviation
“ ”
with a letter
“ ”
next to it will be
displayed, if the alarm has not been set previously
• Press and hold
ALARM
button for two seconds. The hour
digit will flash
• Adjust the hour using
UP ( ? )
or
DOWN ( ? )
buttons
• Press
ALARM
button again. The minute digits will flash
• Adjust the minutes using
UP (? )
or
DOWN (? )
buttons
• Press
ALARM
button again to confirm and the weekday alarm
time will be set
• Set
Single ( )
day alarm if desired in the same manner
4
1
