Document No
7232-D0001-01
2
PRODUCT SAFETY
(COMPRESSOR / COMPRESSED AIR)
MEA DISCLAIMS ANY AND ALL LIABILITIES FOR DAMAGE OR LOSS DUE TO PERSONAL
INJURIES, INCLUDING DEATH, AND/OR PROPERTY DAMAGE INCLUDING CONSEQUENTIAL
DAMAGES ARISING OUT OF ANY MEA SYSTEM NOT USED IN ACCORDANCE WITH THE
OPERATOR INSTRUCTIONS.
ALL UNITS ARE SHIPPED WITH A DETAILED OPERATOR MANUAL. THIS MANUAL CONTAINS
VITAL INFORMATION FOR THE SAFE USE AND EFFICIENT OPERATION OF THIS UNIT.
CAREFULLY READ THE OPERATORS MANUAL BEFORE STARTING THE UNIT. FAILURE TO
ADHERE TO THE INSTRUCTIONS COULD RESULT IN SERIOUS BODILY INJURY OR PROPERTY
DAMAGE.
Care is required when working with an air compressor or compressed air. Compressed air is one of the
many ways energy can be stored. Releasing the stored energy in an uncontrolled manner can result in
catastrophic consequences. Death and permanent disability are all possibilities that can occur. The
following are suggested as minimum precautions to be used when operating the SMARTPACK Air
Compressor. It is important that each work site engages in a risk analysis of that site and produces
procedures in order to minimise injury to their employees. Health and Safety Regulations today require that
this is a compulsory process to be carried out on each site. These, with site specific designed safety
precautions will help to reduce accidents, personal injury and loss of life. It is the responsibility of the
employer to ensure that the work site is safe for the employees.
SAFETY WHEN OPERATING AN AIR COMPRESSOR
•
Do not bypass or disable the oil temperature sensor.
•
Do not expose the tank or compressor to extreme heat.
•
Do not perform any service or repairs until the system has been completely
relieved of air pressure.
•
Maintenance and repairs on the system should only be done by qualified
personnel.
•
Do not operate the compressor while driving.
•
Do not tamper with the pressure relief valve.
•
Run the system at idle speed and under no load conditions for 2 to 3 minutes
before turning the system off to allow system cooling and lubrication to occur.
•
Follow safe work practices, wear the appropriate safety equipment when operating
air-powered equipment, particularly eye and hearing protection.
•
Avoid contact with rotating components, ensure all safety guards are in place.
•
Avoid all contact with pressurized air.
If it penetrates you’re skin, it can enter your
blood stream and cause death.
•
To prevent compressor explosion or fire, make sure that the air entering the
compressor is free of flammable vapors.
•
Vaporized oil propelled by high pressure is an explosive mixture.
•
Do not breathe the compressor air, vaporized oil is a respiratory hazard.
•
Stay clear of all moving parts when the system is operating.
•
Follow safety procedures for tyre service operations as set by the authority.
Summary of Contents for SMARTPACK 180-H
