Mea SMAC 40D-15HP, Owner'S/Operator'S Manual

Page: 8 / 34

Document No 7201-D0001-13 4
3. SPECIFICATIONS
Compressor Type: Oil injected rotary screw compressor
Drive System: Diesel powered via direct mechanical coupling
Control: Pneumatic
Maximum Air Delivery 40 CFM @ 150 psi
Pressure Regulation: Mechanical inlet control valve modulates flow in response to demand
Inlet Valve Regulation Pneumatic
Engine Control System: Pneumatic speed control, engine and compressor high temperature and
pressure engine shutdown system
Safety Features 200 PSI relief valve in compressor sump
Temperature safety sensor in the compressor
Rapid blow-down valve to discharge system pressure on shutdown
Lubrication: All replacement compressor oils must be approved by MEA prior to use.
Warranty will be nullified if oil has not been approved.
MEA certified and approved semi synthetic compressor oil
Part Number 10019
– P0002
Quantity of Compressor Oil Required
– 4 Litres
Filters Paper-type replaceable air filters (Not Possible to Clean)
Spin-on type engine oil filter element (Not Possible to Clean)
Spin-on type engine fuel filter element (Not Possible to Clean)
Spin-on type compressor oil filter element (Not Possible to Clean)
Coalescing filter element (Not Possible to Clean)
Hydraulic Option Maximum Oil Flow 15HP 20LPM 24LPM
Maximum Flow 15HP 210Bar 38LPM
Battery Fuel Module Battery 340CCA (option)
Fuel
– 25L (option)