Me CUVEO CR-UPS2000, Manual

Page: 19 / 44

EN
19
SAFETY INSTRUCTIONS
Do not attempt to repair by yourself!
• Damages resulting from non-compliance
with these operating instructions shall render
the warranty void. We shall not be liable for
secondary damages!
• We are not liable for property damage
or for personal injury caused by improper
handling or non-compliance with the safety
instructions. In such cases, the warranty is
no longer valid!
• Please do not use this product at hospitals
or medical establishments. Even if the
product transmits only very weak radio
signals, they could cause interference with
the functioning of life-preserving systems.
The same may also be valid for other areas.
• The product may only be installed by a
qualified electrician who is familiar with the
relevant regulations (e.g. VDE)! Improper
work on the mains voltage not only poses a
danger to yourself, but others as well!
• If you do not have technical expertise in
mounting, do not mount the product yourself;
engage a professional to do the work.
• The design of the wireless flush-mount
switch corresponds to protection class I.
The only voltage source that may be used
for the “Roller shutter” wireless flush-type
switch is standard mains voltage (230 V
AC, 50 Hz, with protective conductor) from
the public mains supply.
• Mounting may only be carried out if all the
poles of the supply lines to the wireless
flush-type switch are disconnected from the
mains voltage. Otherwise there is a risk of
electric shock!