Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
36
36
4.4 Detection channel (Alarm) / Direction of movement
The
“A
larm
”
function can be used to monitor a room in case of absence and to call up certain actions
in the KNX system when motion is detected.
The
“Detection channel (A
larm
)”
is always independent of brightness.
In addition, a movement direction detection can be implemented with this channel. This makes it
possible to detect in which direction a person is moving.
4.4.1 Detection channel (Alarm)
The following image shows the available settings:
Figure 21: Settings
–
Detection channel (Alarm)
